- Recycled Plastic Lumber
- Mats and Pads
- Fabricated Products
Mechanic's Wash & Parts Cleaning Solvent
With today's strong emphasis on alternative chemicals usage and environmentally correct disposal, we have developed RHINO JUICE MW (Mechanic's Wash). Our solvent blend contains no know hazardous ingredients restricted under SARA Title III, but is 30% stronger than the commonly used stoddard solvent, which is a RCRA flammable hazard.
RHINO JUICE MW IS 100% SOLVENT WITH NO WATER, SOAPS OR SURFACTANTS.
RHINO JUICE MW IS a NON-RCRA SOLVENT with a 142 tag closed cup, flash point.
RHINO JUICE MW CONTAINS NO CHLORINATED SOLVENTS.
RHINO JUICE DISSOLVES OIL, GREASE, FUEL AND CARBON.
Due to its lack of hazardous components, RHINO JUICE MW is an ideal candidate for on-site or off-site recycling or a fuels blending program. Used RHINO JUICE MW may be picked up by your used oil hauler as long as it has not been contaminated by a hazardous substance. Remember, when using any non-hazardous chemical, the addition of the smallest amount of a hazardous constituent will render the waste hazardous. This action will result in the unnecessary high cost and liabilities of hazardous waste disposal. The total replacement or recycling of all hazardous chemicals used at your facility would be in your best interest.
RHINO JUICE MW has been designed and blended to meet the parts cleaning needs of many industries such as railroads, automotive and fleet garages, machine shops, plant maintenance departments, vocations schools, etc.
As with the use of any chemical, common sense precautions are required (see MSDS).
To minimize shipping costs RHINO JUICE MW is delivered from our blender?s many US facilities. No matter if you are in San Diego or Boston, Seattle or Miami, freight costs will be kept to a minimum.
We supply the Wheeling and Lake Erie engine shop with Rhino Juice Mechanic's Wash, a degreaser/cleaner used to dissolve grease and carbon.
"What we use the Rhino Juice for is for degreasing of engine blocks and locomotive truck assemblies and also locomotive frames when we are doing a rebuild. After we allow it to soak for a brief time, we then pressure wash it off and the waste water then goes to our waste water treatment plant where it is treated and the oils resulting in the treatment of the water are skimmed off and then when our skimmer tank is full, we call a vac truck out to empty the tank and the waste product is sent for disposal. This is the best degreaser that I've ever had experience with. I have been here for 20 years and we have used that product for most of the time that I've been here."
They also like the "above 140F" flash point and no chlorinated hydrocarbons. RJMW can also be used in drum mounted parts washers and soak tanks.